Stop acting like any votes counted after 8PM on election day are valid. They are not.
Stop acting like the media controls who the POTUS is. They do not.
Stop acting like cucked world leaders around the globe control who the POTUS is. They do not.
WE control who the president is, and the race is already over. TRUMP WON. It's just a matter of if commies want to die to try (and fail) to force their steal.
I was on the_donald, /r/ar15, and /r/gundeals pretty regular until the_donald got shut down. I mostly reside here. But I dont put many sales up on reddit anymore because we're busy enough as it is right now. But yes, im totally legit and can answer any questions about an order, our products, or engravings
Awesome, Don't really have any questions beyond the pointless "how has shipping been?" type, i did some digging before i bought, you guys were far and away my best option in my budget, AND weren't sold out
Shipping on stripped serialized lowers is pretty quick ,1-2 weeks depending on the receiving FFL, 80s are a little faster, complete lowers and populated lowers might be 3-4 weeks due to build times and getting parts in from backlogged vendors. Oh, and we have a AR-308 and TAC9 80%s on thr way too. Probably around Thanksgiving. Just finishing up the molds for those.
And you'll drill that third pin hole. No one will never know and if you ever need to use it, you can. You won't run your mouth or post pictures of it on the internet. It'll be in the safe, in case you ever need it. 👌
Yeah you can buy all of it online, 100% totally legally. It's only illegal to drill that third pinhole unless you're an SOT and can legally manufacture post-samples. If someone drilled that pinhole anyways, they could buy everything else (trigger, auto sear, full auto BCG which most are anyways) online 100% legally. It's not illegal to possess any of those items by themselves.
Clarification. If You own an A.R15, you are not allowed to own any M16 parts, you will be fucked (exception is bc, But trigger, hammer, disconnector and especially the auto sear); FFLs can, they are allowed to install them (if legal) and sell them
Any place that sells M16 parts should have NFA warnings in the ad; don’t do it. But If you don’t have any guns the parts will fit, those are just paperweights, you can do whatever you want
People go back and forth on that all the time. They call it "constructive possession" but regardless, you can absolutely legally purchase the full auto trigger groups and the fullauto cut BCGs (which most are now anyways) without being an SOT. The whole point of my post is that we agree on the premise that it's illegal but prudent for a normal citizen to drill a third pinhole in the first place.
Different sears you can purchase commercially. If you can find one. And your lower has to have or have been milled or designed to accommodate the longer bcg travel. LERC lowers are full auto ready for example.
And don’t be stupid after that, 20 years for being stupid
Infowars stopped selling because I think he was catching flak for trying to arm people. But I can most definitely put that art on an 80 minis the ???? OF 1000 part. Those were a limited edition for infowars
An 80% lower is not a firearm by the ATF definition. It requires drilling and milling to be made into what could be used as a firearm. It does not have a serial number nor does it require a NICS check to purchase.
Great find my friend. Hold on to it. Will be worth some real fun tickets in a few years best looking Sir Donald lower I’ve seen. May be the best lower I’ve seen.—- Hoi Pelloi —-
Okay, I figured out what that is. Thanks for feeding the Tennessee Arms Lower info. And it is beautiful, next time turn Trump into Superman and make it a Super Tennessee Arms Lower.
.458 socom is 45 caliber though, for POTUS 45, both are YUGE, but one has a more fitting first 2 decimal places, also you can convert 5.56 mags to .458 SOCOM(30 rounders become 10) pretty easy, .50 beowulf i have no idea if you can
We need to stop legitimizing the steal.
Stop acting like any votes counted after 8PM on election day are valid. They are not.
Stop acting like the media controls who the POTUS is. They do not.
Stop acting like cucked world leaders around the globe control who the POTUS is. They do not.
WE control who the president is, and the race is already over. TRUMP WON. It's just a matter of if commies want to die to try (and fail) to force their steal.
Hey, dickface. I notice you enjoy trolling conservatives. Donald Trump is still your president.
Came here to say this. Show us the finished product when you’re done
I literally just saluted my monitor.
I hope you brought Kleenex.
Noooo, not that kind of salute!
Wait... It's not?
<Kleenex enters the chat>
He did win so get on it.
This is hotter than Sharon Stone in the 90's!
I love TN Arms, I have two and both have held up really well after several years of ownership.
Thanks!
Dude, I just bought one of their polymer lower kits last night, white molon labe etching
And I cant wait to engrave it for ya!
Holy crap, account looks legit, i had no idea you guys were on here
I was on the_donald, /r/ar15, and /r/gundeals pretty regular until the_donald got shut down. I mostly reside here. But I dont put many sales up on reddit anymore because we're busy enough as it is right now. But yes, im totally legit and can answer any questions about an order, our products, or engravings
Please sir, I'd like a trump lower.
Awesome, Don't really have any questions beyond the pointless "how has shipping been?" type, i did some digging before i bought, you guys were far and away my best option in my budget, AND weren't sold out
Shipping on stripped serialized lowers is pretty quick ,1-2 weeks depending on the receiving FFL, 80s are a little faster, complete lowers and populated lowers might be 3-4 weeks due to build times and getting parts in from backlogged vendors. Oh, and we have a AR-308 and TAC9 80%s on thr way too. Probably around Thanksgiving. Just finishing up the molds for those.
Being in TN i was hoping y'all would be based, but now i have proof. Very glad i spent my money there.
I'm glad you did too! Lol, yes we are very unapologetically pro-america. And I am very personally pro-Papa Bear Donny J.
Bought two a few months back with custom engraving. No problems at all! You enjoy it 😁
_776 of 1000 nice
yuh how much is it
I made a thousand of them for Infowars in 2017. Im the engraver/one of the owners of Tn Arms.
True patriots give up their assault rifle 15's and wear a mask.
And you'll drill that third pin hole. No one will never know and if you ever need to use it, you can. You won't run your mouth or post pictures of it on the internet. It'll be in the safe, in case you ever need it. 👌
Yeah you can buy all of it online, 100% totally legally. It's only illegal to drill that third pinhole unless you're an SOT and can legally manufacture post-samples. If someone drilled that pinhole anyways, they could buy everything else (trigger, auto sear, full auto BCG which most are anyways) online 100% legally. It's not illegal to possess any of those items by themselves.
Clarification. If You own an A.R15, you are not allowed to own any M16 parts, you will be fucked (exception is bc, But trigger, hammer, disconnector and especially the auto sear); FFLs can, they are allowed to install them (if legal) and sell them
Any place that sells M16 parts should have NFA warnings in the ad; don’t do it. But If you don’t have any guns the parts will fit, those are just paperweights, you can do whatever you want
People go back and forth on that all the time. They call it "constructive possession" but regardless, you can absolutely legally purchase the full auto trigger groups and the fullauto cut BCGs (which most are now anyways) without being an SOT. The whole point of my post is that we agree on the premise that it's illegal but prudent for a normal citizen to drill a third pinhole in the first place.
Different sears you can purchase commercially. If you can find one. And your lower has to have or have been milled or designed to accommodate the longer bcg travel. LERC lowers are full auto ready for example.
And don’t be stupid after that, 20 years for being stupid
Gives the ability for full-auto
I saw ammo is available at MidwayUSA.com. Good folks there.
If you want the cheapest available ammo, AmmoSeek.com is your friend.
If you want ammo that is actually in stock ammoseek is your friend.
Except for when you get a notification about BassPro or Cabela's having 9mm in stock for .28 cents a round, and it's gone in milliseconds 😢
Gunbot as been good to me with ammo in stock. Bought a fuck ton of IMI 5.56 for 38c/rd 2 weeks ago
When he wins? He already won, son. Build it.
80% lowers are the future pedes. God bless you and that magnificent paper weight.
Don't forget the binary trigger. Two terms, two scoops, two shoots!
what in the hell is that and where do i get one?
An 80% lower receiver. It’s not finished so legally it isn’t a firearm and you can have it shipped to your house without a background check.
You then finish it yourself (usually using included templates) and have a working unregistered AR-15 power receiver.
I want to know too! What is that and why is it so great?!!
Start now.... In case
Beautiful
We've got our AR308 and TAC9 80% molds inbound if you wanna collect the whole set. 😉
Infowars stopped selling because I think he was catching flak for trying to arm people. But I can most definitely put that art on an 80 minis the ???? OF 1000 part. Those were a limited edition for infowars
Without violating any ad rules, website!
I would love a multi Cal (556 size), 308 or nine (or all the above) I don’t care about the limited edition numbers
I have eight blanks ready to start on, those will take them back seat if I can get some of these Trump engraved ones
I can engrave on blanks you've already got too. They don't have to be my 80s. My laser is equal opportunity.
That is a beautiful thing, my friend!!
So bad ass. Would love to have the tools/ability to make my own one day!
It's not hard.....get yourself access to a drill press and then have the ability to read a comic and you can build an AR
A special jig that you can reuse over and over is around 300 bucks. Then a nice router to do the milling. And drill a few holes. That’s it.
Cheap Well brand drill presses start around $100, so if you make four or five receivers without it breaking you would save money.
Wow I honestly thought it would have taken a whole garage haha!
Just go slow and only remove a little material per pass, take your time and it will work fine.
It helps.
I want one
That’s beautiful. I hope you get to build it.
start now brother.. I've got the drill press and router humming.
I'm not a gun person (yet!). What does this mean?
An 80% lower is not a firearm by the ATF definition. It requires drilling and milling to be made into what could be used as a firearm. It does not have a serial number nor does it require a NICS check to purchase.
Oh I like that.
If you can find parts!! I’ve been trying for months lol
He never lost! :-)
Where did you buy this beautiful lower. Inquiring patriots need to know
Great find my friend. Hold on to it. Will be worth some real fun tickets in a few years best looking Sir Donald lower I’ve seen. May be the best lower I’ve seen.—- Hoi Pelloi —-
How do I get this?
Damn. Dope otherwise !
build it so you have it to ensure his win is honored
Okay, I figured out what that is. Thanks for feeding the Tennessee Arms Lower info. And it is beautiful, next time turn Trump into Superman and make it a Super Tennessee Arms Lower.
Do you have that picture in high definition by chance?
I’ll look later but thanks. I’m looking for just a picture of trump, I have a laser engraver.
I've heard rumors... that some girls have a third hole
Is that a polymer lower?
I think just the drill guide it’s in is polymer
Just thought of it, you need a Upper for it in .458 socom, those rounds are YUGE
.458 socom is 45 caliber though, for POTUS 45, both are YUGE, but one has a more fitting first 2 decimal places, also you can convert 5.56 mags to .458 SOCOM(30 rounders become 10) pretty easy, .50 beowulf i have no idea if you can
gotta keep the options open, parts availability may be an issue
I am extremely jealous. I only have a dumb ol PSA lower
I just finished my AR-9 80%. Its time to get hings in order.
I have a Washington 1776 cigar that is sitting patiently in my humidor, awaiting the sweet butane flame.
I will leave my office, should he flip this thing during the day. Forward my calls to my cell. I’ll be in my truck bed flag waving for about 2 hours.
Do it now cheese dick
Ordering my 80% Lower this week!