We build most of our guns now also ,so it gives a lot of satisfaction using a highly accurate rifle you built to your own custom design with Hand loads you made your self to get the highest accuracy & performance out of it .
I recommend if you are thinking of getting into it, to keep some money set aside & watch auction sites etc for reloaders going cheap.I brought a fully set up Dillon 550B,Scales ,Multi dies,Vibe cleaner etc, that a well known competitive shooter had won & never used for under 1/2 price of what jut the machine itself was worth, all because l had the cash ready .High quality models are often given as prizes at top shooting events,competitions etc & the guys often already have their own set up or have ammo sponsors so they sell them off cheap.
I find reloading as relaxing & as engrossing as reading a good book now ,if l have a stressful week l really enjoy sitting down & adding to my ammo stock pile,you will not regret getting into it.if you need any help/advice just ask if l can help l will,we need to encourage everyone to be more involved in enjoying the great gift of the 2A & the healthy & relaxing benefits from it .
If you do a bit of shooting regularly you should look at reloading ,l reload for everything l want premium performance out of, from 338 Lapua Magnum ,458 Mag to 223, the gains in accuracy & performance alone pays for itself,let alone the cost savings .
Calibers like the 44 mag really shine when reloaded both for accuracy & performance & you will save at least 50% on ammo. I used a Model 29 - S&W with a 6 inch barrel for a decade as my hunting/Bear repellent carry gun, before swapping to my Glock 10mm which l will not part with now & is my every day carry ,but will one day get a custom Model 29 - S&W done as a Elmer Kieth clone 4½” .44 Magnum.
I just finished reloading 1000 rounds of full power 10mm 'Bear/Self Defense loads' for hunting season for well under 1/2 price of the cheapest 10mm .
400 rounds !0mm 220-grain Hard Cast doing 1230fps
600 rounds of my favorite Hog/Deer load a 180-grain Trophy Bonded Bear Claw doing 1280 fps
Next up l will be reloading hunting loads for my 338 Lapua Magnum & 338 Edge,l have just returned from a hunting trip where l made the longest shot of my Military & Hunting life in the field at 1235 yards with the 338 Edge only possible by reloading the ammunition myself to get the maximum performance & accuracy . The 338E is a incredible hunting caliber that makes the 338 Lapua Magnum look like it's little bitch with everything up to 300 grns Bullets ,these 285gr ELD-M 's , doing 2900fps & hit like sledge hammers on Elk & Deer,l wish l had had one as a SDM in Afghanistan for my last 2 tours.
Glock 20 Short Frame 10mm Every Day Carry / Ranch gun
Yes, this. I've been reloading since I got my first gun, and that was in 1995. It isn't rocket science; it isn't insanely expensive, and it isn't only for fanatics. Plus, I pick up discarded brass at the range, reload it and put it in the stockpile.
A reloading press. To save on money/make custom loads, avid shooters invest in reloading equipment. The process involves cleaning and resizing stretched brass, removing and replacing primers, inserting measured powder charges, and pressing in projectiles.
By the looks of it he's reloading ammo. My grandpa recently, a Vietnam vet who is getting pretty fickle and old showed me how to load maybe a month or two back and this looks like he's doing something pretty similar just more high tech than the equipment I got to use.
Been looking into some presses and equipment to get going based on availability and price of ammo right now. It looks kind of time intensive but I'd rather spend time on this then not have ammo.
How do we even find out? (Hint: Asking "What's the address of the local militia?" at the gun shop won't get you anything but a lot of suspicious looks.)
And if we do have one...you think they'll be operating their own shooting ranges?
But when you say we need a 1776 plan, you are spot on.
What is this? Reloads for ants?!
Bullet ants.
Ayyyyyyyy
Ah the legendary .22 pixel automatic reloader.
Can’t upload anything hirer Rez 🥺
Isn’t primer also in short supply?
Yes. Reloading supplies are fucked too right now.
So sad how you lost it in a boating accident
You need to invest in a bullet feeder.
We build most of our guns now also ,so it gives a lot of satisfaction using a highly accurate rifle you built to your own custom design with Hand loads you made your self to get the highest accuracy & performance out of it .
I recommend if you are thinking of getting into it, to keep some money set aside & watch auction sites etc for reloaders going cheap.I brought a fully set up Dillon 550B,Scales ,Multi dies,Vibe cleaner etc, that a well known competitive shooter had won & never used for under 1/2 price of what jut the machine itself was worth, all because l had the cash ready .High quality models are often given as prizes at top shooting events,competitions etc & the guys often already have their own set up or have ammo sponsors so they sell them off cheap.
I find reloading as relaxing & as engrossing as reading a good book now ,if l have a stressful week l really enjoy sitting down & adding to my ammo stock pile,you will not regret getting into it.if you need any help/advice just ask if l can help l will,we need to encourage everyone to be more involved in enjoying the great gift of the 2A & the healthy & relaxing benefits from it .
https://imgur.com/a/5sdODMB
If you do a bit of shooting regularly you should look at reloading ,l reload for everything l want premium performance out of, from 338 Lapua Magnum ,458 Mag to 223, the gains in accuracy & performance alone pays for itself,let alone the cost savings .
Calibers like the 44 mag really shine when reloaded both for accuracy & performance & you will save at least 50% on ammo. I used a Model 29 - S&W with a 6 inch barrel for a decade as my hunting/Bear repellent carry gun, before swapping to my Glock 10mm which l will not part with now & is my every day carry ,but will one day get a custom Model 29 - S&W done as a Elmer Kieth clone 4½” .44 Magnum.
I just finished reloading 1000 rounds of full power 10mm 'Bear/Self Defense loads' for hunting season for well under 1/2 price of the cheapest 10mm .
400 rounds !0mm 220-grain Hard Cast doing 1230fps
600 rounds of my favorite Hog/Deer load a 180-grain Trophy Bonded Bear Claw doing 1280 fps
Next up l will be reloading hunting loads for my 338 Lapua Magnum & 338 Edge,l have just returned from a hunting trip where l made the longest shot of my Military & Hunting life in the field at 1235 yards with the 338 Edge only possible by reloading the ammunition myself to get the maximum performance & accuracy . The 338E is a incredible hunting caliber that makes the 338 Lapua Magnum look like it's little bitch with everything up to 300 grns Bullets ,these 285gr ELD-M 's , doing 2900fps & hit like sledge hammers on Elk & Deer,l wish l had had one as a SDM in Afghanistan for my last 2 tours.
Glock 20 Short Frame 10mm Every Day Carry / Ranch gun
https://i.imgur.com/QMi2HhA.jpg
https://imgur.com/a/QQIWPPo
https://i.imgur.com/MqTjE0M.jpg
Yes, this. I've been reloading since I got my first gun, and that was in 1995. It isn't rocket science; it isn't insanely expensive, and it isn't only for fanatics. Plus, I pick up discarded brass at the range, reload it and put it in the stockpile.
Stock up while you can.
Ammo reloader
... for tiny people.
A reloading press. To save on money/make custom loads, avid shooters invest in reloading equipment. The process involves cleaning and resizing stretched brass, removing and replacing primers, inserting measured powder charges, and pressing in projectiles.
Dillon reloading press.
reloading press
By the looks of it he's reloading ammo. My grandpa recently, a Vietnam vet who is getting pretty fickle and old showed me how to load maybe a month or two back and this looks like he's doing something pretty similar just more high tech than the equipment I got to use.
🔍🕵️♂️
Reduce, re-use, reload.
"printing" money right there
Sunday gunday is done. Time to think.
Meh! I still prefer the guns, personally! 😃
Been looking into some presses and equipment to get going based on availability and price of ammo right now. It looks kind of time intensive but I'd rather spend time on this then not have ammo.
WE HAVE THE BEST ANTS FOLKS, BELIEVE ME
I forgot my glasses, what am I looking at? Is 2.7mm ammo getting made?
I have 2 other bigger I.e. higher res versions that I can’t post because of upload limits
That answers my question.
**DEAR MODS - the higher res version of this is more easily visible and REALLY COOL....
Please consider ..... 🤙😉
Great we have guns, but like poster sys, we need a 1776 plan. Find a local militia.....an ask to use their shooting range for practice 😉
What makes you think we all have a local militia?
How do we even find out? (Hint: Asking "What's the address of the local militia?" at the gun shop won't get you anything but a lot of suspicious looks.)
And if we do have one...you think they'll be operating their own shooting ranges?
But when you say we need a 1776 plan, you are spot on.
Elen degenerate gave her that baby stroller
Commie Ants will be terrified of this gif
I don’t set the TD.W upload limits pedes....