Make your own stickers and show the world that MAGA IS FOREVER!
This image is a 300 dpi png you can use to print stickers with Avery 8160 Address Labels. Each label is 1" x 2 5/8" and there are 30 per sheet.
According to Avery's website, this image I made should also work with the following other Avery label sets: 15660, 15700, 15960, 16460, 16790, 18160, 18260, 18660, 22837, 28660, 32660, 38260, 45160, 48160, 48260, 48360, 48460, 48860, 48960, 5160, 5260, 55160, 5520, 55360, 5620, 5630, 5660, 58160, 58660, 5960, 6240, 6521, 6525, 6526, 6585, 75160, 80509, 8215, 8250, 8460, 85560, 8620, 8660, 88560, 8860, 8920, 95520, 95915, Presta 94200.
If any of you encounter any problems trying to print this image with any of these label sets, please let me know and I will try to help you get it to work! :-)
Remember, every one of us can do a little something every day to MAGA a little more!!!
God Bless America, God Bless Donald and Melania Trump, and God Bless Everyone at Patriots.win!!!!
I just attempted to print these, they were a little off on my 5160/8160 labels. Enough of them are on the sticker enough to use, but it's not quite right.
Great work though! They look amazing printed.
I wonder if the picture format throws off the margins.
Yeah, the one with GEOTUS and FLOTUS doesn't have much margin around where it says Make America Great Again, so I can see how that could happen if the alignment gets slightly off. Glad they are still usable though. Maybe you can check the tray in your printer and see if the thing that you can move to select the paper size has become loose and allowed the label sheet to slide over slightly when the printer grabbed the page. I probably should have left more margin space around the edges of the labels, but I was trying to make the photos and text as large as possible to make them easier to see from farther away. Very happy that the quality turned out good for you! Thanks for reporting your experience, and if you continue to have trouble and if anyone else does as well, I could make a revised version of these to try to solve the problem.
It's like the space between them is off by a little bit. The printer tray is definitely tight, so that's not my issue.
My problem might actually be that I'm using no-name brand replacement labels that work for the 5160/8160. They work well for any other templates I use, but it could simply be the labels I am using.
Oh ok that makes sense. They must just be "a hair" different than the genuine Avery set. I have made other sticker designs that are just text slogans with a lot of white space around them that you probably wouldn't even notice any difference with on your set. But since these MAGA designs go all the way to the edge, it's now noticeable. Glad they are still usable, but if you want a custom "tweaked" version for your set, just let me know, I'm happy to help! :-)
Yeah I don't know why they've made so many "models" that are all the same size! It's not like they are something that gets obsolete, or something sold by date like "Avery 1" x 2 5/8" 2021 Edition"! :-)
Look at OP's profile, he's got ALL SORTS of stuff made up and ready to go to the printer, HI-RES, high energy, high quality, well laid out. Has repeatedly offered to custom create anything we can think of!
I marched at my State Capitol with a 2-sided sign of stuff he created, specific to my State. He's been at this a while ...
Thanks for the great shoutout, fren! I remember your cool sign you had professionally made with my designs, that was awesome! Let me know anytime if you need or want anything else! :-)
Here are some "Trump Won" stickers I already made. These are sized for the Avery 5195 address label set. Each one of these labels is smaller, and there are 60 per sheet.
I posted these on patriots.win at the end of January and had to use maga.host for the file upload. Since maga.host is gone now, I just reuploaded it to catbox.moe.
Everyone here gives me so much encouragement, inspiration, fun, and knowledge that I try to do everything I can to give back as much as I can. This is an awesome place, and when awesome people get together and work together, awesome things happen! Glad you are a part of this too, fren! :-)
Good to see you still at it Fren! This is the highest visibility I've seen one of your posts get, persistence pays off :)
Speaking of which, it's our State legislators that are our front lines between now and 2022 mid-terms and many are hard at work on election integrity. We need to bombard them! Also, taking over our local politics ...
Hey fren! Great to see you again!!! Thanks for all of your action and enthusiasm to make your local area great again! :-)
I've been working hard and it's great to be recognized once in a while. But I just want to get the messages out to the public and that's why I appreciate so much all of you here who help me do that!!!
Well good, that part of your comment makes sense. But if you haven't figured out that a majority of the GoP, if not all of them, are controlled opposition, you're not going to get very far.
Trump didn't have control of anything at any time. A republican majority is no different than a democrat majority.
Trump was only one section of our three branches. He knew just how far he could go. I blame RINO scumbags (McCain, Romney) for not allowing a man of the people, to pass law for the people.
Place stickers at Target, Walmart, Lowes, Home Depot, Post Office Boxes, Telephone Poles, outside Starbucks, McDonalds drive thru, at the Apple Store, and any woke business. On Coca Cola boxes at the supermarket. MAGA
Sounds like you've got your weekend all planned out! ;-) Great suggestions, fren!
If people see MAGA support is NOT going away and actually GROWING everywhere, the normies are going to start realizing something is up with the election, and then we can steer them down that rabbit hole. It's already happening, so lets accelerate it!!!
Thanks for your endorsement! I agree, let's get the word and the TRUTH out in front of everyone's faces EVERYWHERE in public IN REAL LIFE so they can no longer deny it. Lots of normies are finally going WTF after the last couple months of disasters, let's take advantage of this opportunity to redpill and win people to our side!!
I have a set I made that mention Biden causing gas prices to go up, plus a couple of the other stupid things he's done, and a "Miss Me Yet?" sticker with Trump on it.
Make your own stickers and show the world that MAGA IS FOREVER!
This image is a 300 dpi png you can use to print stickers with Avery 8160 Address Labels. Each label is 1" x 2 5/8" and there are 30 per sheet.
According to Avery's website, this image I made should also work with the following other Avery label sets: 15660, 15700, 15960, 16460, 16790, 18160, 18260, 18660, 22837, 28660, 32660, 38260, 45160, 48160, 48260, 48360, 48460, 48860, 48960, 5160, 5260, 55160, 5520, 55360, 5620, 5630, 5660, 58160, 58660, 5960, 6240, 6521, 6525, 6526, 6585, 75160, 80509, 8215, 8250, 8460, 85560, 8620, 8660, 88560, 8860, 8920, 95520, 95915, Presta 94200.
If any of you encounter any problems trying to print this image with any of these label sets, please let me know and I will try to help you get it to work! :-)
Remember, every one of us can do a little something every day to MAGA a little more!!!
God Bless America, God Bless Donald and Melania Trump, and God Bless Everyone at Patriots.win!!!!
🇺🇸🇺🇸🇺🇸🇺🇸
I just attempted to print these, they were a little off on my 5160/8160 labels. Enough of them are on the sticker enough to use, but it's not quite right.
Great work though! They look amazing printed.
I wonder if the picture format throws off the margins.
Yeah, the one with GEOTUS and FLOTUS doesn't have much margin around where it says Make America Great Again, so I can see how that could happen if the alignment gets slightly off. Glad they are still usable though. Maybe you can check the tray in your printer and see if the thing that you can move to select the paper size has become loose and allowed the label sheet to slide over slightly when the printer grabbed the page. I probably should have left more margin space around the edges of the labels, but I was trying to make the photos and text as large as possible to make them easier to see from farther away. Very happy that the quality turned out good for you! Thanks for reporting your experience, and if you continue to have trouble and if anyone else does as well, I could make a revised version of these to try to solve the problem.
It's like the space between them is off by a little bit. The printer tray is definitely tight, so that's not my issue.
My problem might actually be that I'm using no-name brand replacement labels that work for the 5160/8160. They work well for any other templates I use, but it could simply be the labels I am using.
Oh ok that makes sense. They must just be "a hair" different than the genuine Avery set. I have made other sticker designs that are just text slogans with a lot of white space around them that you probably wouldn't even notice any difference with on your set. But since these MAGA designs go all the way to the edge, it's now noticeable. Glad they are still usable, but if you want a custom "tweaked" version for your set, just let me know, I'm happy to help! :-)
I appreciate that! These will work for my purposes :P
Whoa, Avery has more than a couple of label sheets.
Yeah I don't know why they've made so many "models" that are all the same size! It's not like they are something that gets obsolete, or something sold by date like "Avery 1" x 2 5/8" 2021 Edition"! :-)
Whoa! Sticky!!! Thank you very much, mod frens!!! :-)
Thank you! I love hearing from all of you and have Mega-MAGA fun making these for everyone!
Congrats!!
Thank you very much, fren! :-)
And Thank You!
You're very welcome, MAGA fren!
Need a row of “Trump Won” in there.
Look at OP's profile, he's got ALL SORTS of stuff made up and ready to go to the printer, HI-RES, high energy, high quality, well laid out. Has repeatedly offered to custom create anything we can think of!
I marched at my State Capitol with a 2-sided sign of stuff he created, specific to my State. He's been at this a while ...
Respect, my friend. I wish more followed the active style, such as ourselves.
We gotta stick together! :)
Thanks for the great shoutout, fren! I remember your cool sign you had professionally made with my designs, that was awesome! Let me know anytime if you need or want anything else! :-)
Here are some "Trump Won" stickers I already made. These are sized for the Avery 5195 address label set. Each one of these labels is smaller, and there are 60 per sheet.
I posted these on patriots.win at the end of January and had to use maga.host for the file upload. Since maga.host is gone now, I just reuploaded it to catbox.moe.
https://files.catbox.moe/s3zcje.png
There are 4 different designs, so you get 15 of each on 1 sheet printed out.
TRUMP WON
BY A LANDSLIDE
.
TRUMP WON
DonaldWon.com
.
TRUMP WON
HereIsTheEvidence.com
.
BIDEN CHEATED
JoeCheated.com
I swear this site just keeps on giving
Everyone here gives me so much encouragement, inspiration, fun, and knowledge that I try to do everything I can to give back as much as I can. This is an awesome place, and when awesome people get together and work together, awesome things happen! Glad you are a part of this too, fren! :-)
Oh! Nice! Definitely printing these out. MAGA makes me Happy
I'm getting good vibes from you, fren!
MAGA makes me happy too, I even think it's fun to say M A G A!!! ;-)
Good to see you still at it Fren! This is the highest visibility I've seen one of your posts get, persistence pays off :)
Speaking of which, it's our State legislators that are our front lines between now and 2022 mid-terms and many are hard at work on election integrity. We need to bombard them! Also, taking over our local politics ...
Hey fren! Great to see you again!!! Thanks for all of your action and enthusiasm to make your local area great again! :-)
I've been working hard and it's great to be recognized once in a while. But I just want to get the messages out to the public and that's why I appreciate so much all of you here who help me do that!!!
Paul Ryan is/ was traitorous treacherous treasonous swamp scum.
Does that fit on a sticker?
Paul Ryan is a Faggot Libturd
Lol, you naive fool.
Well good, that part of your comment makes sense. But if you haven't figured out that a majority of the GoP, if not all of them, are controlled opposition, you're not going to get very far.
Trump didn't have control of anything at any time. A republican majority is no different than a democrat majority.
Trump was only one section of our three branches. He knew just how far he could go. I blame RINO scumbags (McCain, Romney) for not allowing a man of the people, to pass law for the people.
NRA man speak with forked tongue
AWESOME THANK YOU
Thanks fren, you are very welcome! Glad you found these today! :-)
Place stickers at Target, Walmart, Lowes, Home Depot, Post Office Boxes, Telephone Poles, outside Starbucks, McDonalds drive thru, at the Apple Store, and any woke business. On Coca Cola boxes at the supermarket. MAGA
Sounds like you've got your weekend all planned out! ;-) Great suggestions, fren!
If people see MAGA support is NOT going away and actually GROWING everywhere, the normies are going to start realizing something is up with the election, and then we can steer them down that rabbit hole. It's already happening, so lets accelerate it!!!
Forever MAGA!
Great work fren!
MAGA Frens Forever!!!
Thanks a lot good buddy! :-)
Absolutely beautiful pede! And full of MAGA Dragon ENERGY!!!!!! <3 MAGA2021<3
Thank you, fren! I love MAGA Dragon ENERGY, glad it came through in the stickers!!!! :-)
Good job pede!
Thanks a lot magaman!
beautiful work my friend! thanks for sharing
Thank you and I'm glad you were here to share them with! :-)
Great sticky!
Attention memelords:
PLEASE post spicy memes, slogans, and imagery in this format for all pedes to go forth ans shitpost IRL. This is the way!
Thanks for your endorsement! I agree, let's get the word and the TRUTH out in front of everyone's faces EVERYWHERE in public IN REAL LIFE so they can no longer deny it. Lots of normies are finally going WTF after the last couple months of disasters, let's take advantage of this opportunity to redpill and win people to our side!!
MAGA FOREVER!
Great job, yet again! You know I will use these. ;)
Thanks! Oh yeah, I know what you are up too... ;-)
you should make some that say "Thanks, Biden"
that can be put on gas pumps
I have a set I made that mention Biden causing gas prices to go up, plus a couple of the other stupid things he's done, and a "Miss Me Yet?" sticker with Trump on it.
Check these out:
https://files.catbox.moe/go34p8.png
These are for the Avery 5195 address label set, which are smaller stickers, and you get 60 per sheet, so 15 of each design per sheet printed out.
These say:
Gas Prices Went Up
Because Biden Killed
Keystone XL Pipeline
.
Insulin & EpiPen Prices
Went Way Up Because
Biden's New Policies
Reversed Trump's
.
Biden Killed Sports For
Girls & Women By Letting
Tranny Boys & Men Play
With Your Daughters
.
Miss Me Yet?
Trump Won
By A Landslide
(and has a Trump smiling pic!)
.
I am also working on a larger design for Avery 8160 about Biden and Gas Prices so stay tuned... :-)
I'm still amazed we don't have a Trump Statue going. We know for a fact that WRECKS Leftards and makes them weak and stupid and yet.. nothing?
I need a set of these with hard truths on them.