Great kit pede. Always comforts me that our side owns most of the guns. Recently bought an AR-15 and Remington 870 because of what’s been happening. Never thought I’d need more than my handgun but here we are.
im willing to believe if it were not for the cold war and trade issues with USSR we probably would've had CZ75 as military duty gun. Its so accurate they send papers showing a 2 inch grouping at 50m with every gun they sell.
Btw, can anyone tell me what kind of problems you may see with accuracy from case lengths too long in reloaded ammo? I was a fool and bought the orange box reload ammo because I liked the friendly picture and cheap pricing over factory fresh. That was a hard jam to clear.
Pressure issues from hairline cracks in cases. Trim your brass before you reload.
The CZ75 is a fine gun. Very fine. I actually prefer the M9. Once you get worn out GI mags out of the picture they are fantastic and probably a bit more accurate due to sight radius. But I really do love my CZ's. I love them enough I have a 75, 97, 75 compact D, shadow 2, Jericho 941, and am contemplating a canik shark. And before the 1911 guys come crying, I love and own those also.
I know very well what a canik is and where it is made. I have a lot of nice guns. I also have very high standards of quality. I have put hundreds through a tp9 and a shark. They are good guns. When I buy a gun, that's what matters to me. Canik makes a more reliable firearm than Smith or Ruger.
Hell, I have even owned an AR 24. It's Turkish also. Great gun.
They may be but I'm part Armenian and don't want to support that nation for what they did to my ancestors and currently still do to christian minorities
hmm okay. What happened was the slide was nearly all the way back in battery. If you wrent looking carefully you couldn't tell it was sticking out on the back and wouldnt fire. It looked ready to shoot, but was actually a few mm from being fully closed.
Well it comes in a CZ marked plastic case with manual and a paper showing the accuracy and both are stuffed in the foam pocket in the top lid of the case.
Maybe? But I did measure the case after I got it out and it was .002-.003 longer than factory spec, as well as other reloaded.
And the jam occurred when the slide was nearly home, there was only about 2 credit cards worth of the tail sticking out the back. If you weren't looking carefully you'd think it was loaded.
No. I pulled out magazine, and then had to really try hard to rack slide and it popped out. Looked pretty much okay except for some biting marks on the rim. I think the diameter was correct at neck and at base, but the length was .002 off. I was worried that I might damage the gun because of how much force I had to use to pull the slide back. I thought maybe I should take it in but I decided that they'd probably just try to do the same thing.
Try buying a 18.5" scatter gun right now. I have bought 4 in the last 3 weeks. Each time the dealer has called and canceled.
However, I am pretty particular. I have a Benelli M4. But I really want a FN p-12, CZ 612 home def, 870 or 500 tactical. Something for the coat closet.
Jesus no. Not ever. I did once buy a high point carbine for $125. It had a broken eotech parked on top and came with 200 rds of 9mm.
Before I had even seen the gun, I sold it to someone else for $125. I kept the ammo and the eotech 512. The eotech was returned to L3 for $560 credit. As close as I will ever get to one of those things.
They don't want to start a war with people that be-leave in the second amendment, when they don't be-leave people should have guns, cause they probable don't have them.
They loose !!!!!!!!!!!!!!!
You assume I cannot shoot irons......There is a strong likelihood that I shoot them better than you. I actually refer irons, they are much much faster if you know how to shoot.
The presumption you made is somewhat douche bagish
Hey OP, did you put that grip tape on your FN yourself? I have one as well but its got pretty damn good grip texture, was wondering why you did that if you did it yourself.
I did do it myself. I carry that gun and the grip texture is great. Until it rides against your back for a couple hours. In that case It's more like a cheese grater. That's the only reason.
Nice! Did you not care for the default grip texture? I find it pretty course already and to provide great grip. Not judging, just curious. Might consider doing mine too if its worth it. Also I guess more grip on your weapon could never hurt. Well unless its grinding against your back all day lol.
The texture was great in hand. But terrible when carrying all day. Like I said, it felt like having a cheese grater rubbing against the small of my back all day. That wrap, while softer is is equally good.
Well that's one hell of a starter kit.
Just missing a semi-auto boom stick and you got close encounters too
Too bad you can't buy an affordable one right now. They're all sold out.
Saturday Gun Day?
Amen 🙏🏻
Is that you Ron Swanson???
Sunday Gun Day Eve? They could be Norwegian and open presents the night of Christmas Eve.
Found the commie. It's Sunday where I am. Time zones and stuff, how do they work?
Question for you boss, did you just build that?
Trying to get my hands on an MRO myself but they are discontinued.
I did, maybe 3 months ago. Check with LaRue Tactical. Call them first and buy over the phone if they have it.
Thanks brother man.
Once i get my old build rebuilt with 15.5 inch SLR rail and Dead Air Sandman-S, Ill be posting some pics too.
Sounds like it will be a nice rig. I'm waiting for my SBR check to be cashed on this Wilson build.
I thought I recognized that MBT-2S
Yeah, there's nothing at all newsworthy else to post. A plain, dull picture of a gun spammed for 30hours really helps everyone
U/ Magician, defender of bandwidth.
We have all read the news thats why we post guns.
Look at those eagles, Commie Hitler!!1!!1111!! /s
Great kit pede. Always comforts me that our side owns most of the guns. Recently bought an AR-15 and Remington 870 because of what’s been happening. Never thought I’d need more than my handgun but here we are.
Never thought I'd need a bigger gun safe either.
FN is good shit.
im willing to believe if it were not for the cold war and trade issues with USSR we probably would've had CZ75 as military duty gun. Its so accurate they send papers showing a 2 inch grouping at 50m with every gun they sell.
Btw, can anyone tell me what kind of problems you may see with accuracy from case lengths too long in reloaded ammo? I was a fool and bought the orange box reload ammo because I liked the friendly picture and cheap pricing over factory fresh. That was a hard jam to clear.
Pressure issues from hairline cracks in cases. Trim your brass before you reload.
The CZ75 is a fine gun. Very fine. I actually prefer the M9. Once you get worn out GI mags out of the picture they are fantastic and probably a bit more accurate due to sight radius. But I really do love my CZ's. I love them enough I have a 75, 97, 75 compact D, shadow 2, Jericho 941, and am contemplating a canik shark. And before the 1911 guys come crying, I love and own those also.
Save your money don't buy that Turkish garbage
I know very well what a canik is and where it is made. I have a lot of nice guns. I also have very high standards of quality. I have put hundreds through a tp9 and a shark. They are good guns. When I buy a gun, that's what matters to me. Canik makes a more reliable firearm than Smith or Ruger.
Hell, I have even owned an AR 24. It's Turkish also. Great gun.
They may be but I'm part Armenian and don't want to support that nation for what they did to my ancestors and currently still do to christian minorities
hmm okay. What happened was the slide was nearly all the way back in battery. If you wrent looking carefully you couldn't tell it was sticking out on the back and wouldnt fire. It looked ready to shoot, but was actually a few mm from being fully closed.
I never received any paper like that with mine, but it's accurate nonetheless I agree.
I have many and have never seen it either.
Well it comes in a CZ marked plastic case with manual and a paper showing the accuracy and both are stuffed in the foam pocket in the top lid of the case.
Have the cases. Don't have that paper work. I do have proof cartridges from some. But everyone does that.
stutter during ejection causing shit jams like you experienced.. what's accuracy matter when you cant shoot?
Maybe? But I did measure the case after I got it out and it was .002-.003 longer than factory spec, as well as other reloaded.
And the jam occurred when the slide was nearly home, there was only about 2 credit cards worth of the tail sticking out the back. If you weren't looking carefully you'd think it was loaded.
...
No. I pulled out magazine, and then had to really try hard to rack slide and it popped out. Looked pretty much okay except for some biting marks on the rim. I think the diameter was correct at neck and at base, but the length was .002 off. I was worried that I might damage the gun because of how much force I had to use to pull the slide back. I thought maybe I should take it in but I decided that they'd probably just try to do the same thing.
Damn i wish I got my 365 in FDE, looks awesome
That one's an FNS9C. Regardless, it does look good brown.
Everybody's got all these shiny new guns.... Newest I have goes back 30+ years, but it always goes bang :-)
The 75 compact was built in 1999
A superb combat pistol!
I'd love to get a cz, but I'm ok with what I have :-)
Nice. Who’s the manufacturer of the lower receiver on your ar?
Wilson Combat
Where is the shotgun??? It’s the cheapest one of the core 3! 00 buck is the way.
Try buying a 18.5" scatter gun right now. I have bought 4 in the last 3 weeks. Each time the dealer has called and canceled.
However, I am pretty particular. I have a Benelli M4. But I really want a FN p-12, CZ 612 home def, 870 or 500 tactical. Something for the coat closet.
Looks just like my zombie killer kit.
Wait...I’m starting to think there’s no difference
Starter kit?? Damn bro that some kit!!!
I'm not really a beginner I have a few more
Stay strapped or get clapped 🇺🇸
Don’t forget the stack of job application forms.
That Wilson Combat BCM grip makes my pecker tingle.
Do the idiot "Marxists" realize how quickly they would be wiped out if they really initiate an armed insurrection?
Where’s Julius Evolas selected works? You need to defend the mind as well as the body.
Might I recommend the Bible expansion pack? 😊
Looks exactly like the Shadow Knight class armor from Ruins of Kunark expansion in Everquest
It could be 100 for all I know.
Jesus no. Not ever. I did once buy a high point carbine for $125. It had a broken eotech parked on top and came with 200 rds of 9mm.
Before I had even seen the gun, I sold it to someone else for $125. I kept the ammo and the eotech 512. The eotech was returned to L3 for $560 credit. As close as I will ever get to one of those things.
All it’s missing is the bayonet for poking some commies once you are out of ammo
They don't want to start a war with people that be-leave in the second amendment, when they don't be-leave people should have guns, cause they probable don't have them. They loose !!!!!!!!!!!!!!!
A Wilson Combat for a starter pack? Yikes, lmao.
The MRO is badass but you need some backup irons.
I have a set of Troy dioptics from LaRue. Fact is, I'll never shoot out of them, so why install them?
It's your call fren, but there a reason they are called BUIS (back up iron sights). I'd run em, plus it's good to have experience using them.
You assume I cannot shoot irons......There is a strong likelihood that I shoot them better than you. I actually refer irons, they are much much faster if you know how to shoot.
The presumption you made is somewhat douche bagish
Sorry, I think you took my light hearted suggestion too harshly. This isn't toxic reddit so let's just agree to disagree without insults and MAGA on.
Hey OP, did you put that grip tape on your FN yourself? I have one as well but its got pretty damn good grip texture, was wondering why you did that if you did it yourself.
I did do it myself. I carry that gun and the grip texture is great. Until it rides against your back for a couple hours. In that case It's more like a cheese grater. That's the only reason.
Nice! Did you not care for the default grip texture? I find it pretty course already and to provide great grip. Not judging, just curious. Might consider doing mine too if its worth it. Also I guess more grip on your weapon could never hurt. Well unless its grinding against your back all day lol.
The texture was great in hand. But terrible when carrying all day. Like I said, it felt like having a cheese grater rubbing against the small of my back all day. That wrap, while softer is is equally good.
Cool man, if I run into the same problem I know how to fix it. Thanks for the info.
good start. Perhaps a 20 gauge as A healthy supplement
There's three types of guns I suggest every patriot have.
A semi- or full automatic for protection against rioting mobs.
A short shotgun for defense against home invaders.
And a long range sniper rifle for voting out Democrats.
I have them all in abundance with exception of the select fire. Those are cost prohibitive.
That last line is a little too much. You could just call them commies or radicals.
When there starts being a difference again, I will.